JVCC DCC-9P Double-Sided Fabric Tape: 2 in x 75 ft. (White)

<p><b>JVCC DCC-9P Double-Sided Fabric Tape</b> is a fabric tape coated on both sides (AKA double-coated) with an aggressive synthetic hot melt rubber adhesive. The tape is 9.25 mils thick exclusive of the release liner. It offers instant tack and adhesion on rough surfaces. Application uses include carpet laying; fixing &amp; splicing of textiles; securing polyethylene film to brick &amp; cinder block walls; and other general mounting on rough or fibrous surfaces. DCC-9P provides additional support during prepping applications of abatement areas. Its white polyester cloth substrate is coated with white adhesive and the tape comes on a gold siliconized paper release liner. The tape is hand tearable and not plasticizer resistant.</p> NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 48mm x 23m. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.<br><br><b>Technical Information</b><br>- Core: 3 inch diameter <br>- Backing/Carrier: polyester cloth <br>- Adhesive: synthetic hot melt rubber <br>- Release Liner: gold siliconized paper <br>- Thickness: 9.25 mils (carrier, adhesive) <br>- Adhesion: 110 ounces per inch (to stainless steel test panel) <br>- Tensile Strength: 15 pounds per inch (longitudinal) <br>- Service/Operating Temperature: -10F to 140F <br>- Elongation: 10 % <br>

• JVCC DCC-9P Double-Sided Fabric Tape is a fabric tape coated on both sides (AKA double-sided) with an aggressive synthetic hot melt rubber adhesive. The tape is 9.25 mils thick exclusive of the release liner.
• The tape offers instant tack and adhesion on rough surfaces. DCC-9P provides additional support during prepping applications of abatement areas.
• Application uses include carpet laying; fixing & splicing of textiles; securing polyethylene film to brick & cinder block walls; and other general mounting on rough or fibrous surfaces.
• Its white polyester cloth substrate is coated with white adhesive and the tape comes on a gold siliconized paper release liner. The tape is hand tearable and not plasticizer resistant.
• Carrier/Backing: polyester cloth. Adhesive: synthetic hot melt rubber. Release Liner: gold siliconized paper. Thickness: 9.25 mils (carrier, adhesive). Adhesion: 110 ounces per inch (to stainless steel test panel). Tensile Strength: 15 pounds per inch (longitudinal). Service/Operating Temperature: -10F to 140F. Elongation: 10%. Core: 3-inch diameter.